Common values for an experimental smart home (lab) project. More...

#include "sweetDemo.h"
#include <stdio.h>

Functions
void	chgFilNames (void)
	Set the current date in event & retain file paths.

Variables
cmdLookUp_t	cmdLookUp []
	The common command look up table.
char	dayFilNam []
	Path of the table to log a set of values for every day.
char	evtFilNam []
	Path of the daily event file.
volatile float	fLine
	last valid power line frequency
volatile int	invHasUnloadPow
	The miniJoule inverter has battery unload power.
smdX30modbus_t	smdX30modbus [ANZmodSLAVES]
	Descriptive and state array for smart meters on Modbus.
volatile int	tempTankWater
	Last value of tank water temperature in mgrdC.
volatile uint8_t	tempWaterBadCnt
	Tank water temperature bad read count.
valFilVal_t	valFilVal
	All process values relevant for log files and HMI.

Detailed Description

Common values for an experimental smart home (lab) project.

Revision history

Function Documentation

◆ chgFilNames()

void chgFilNames ( void )

Set the current date in event & retain file paths.

The current date from actRTmTxt is set into the file names evtFilNam and retFilNam

Variable Documentation

◆ evtFilNam

char evtFilNam[]

Path of the daily event file.

The current date in the format 2025-09-30 has to be set at position EFNY by chgFilNames().
The event file outLog is a text file used for one day for events and currently (see useOutLog4errLog) for errors, also.

See also: dayFilNam EFNY retFilNam

◆ dayFilNam

char dayFilNam[]

Path of the table to log a set of values for every day.

This is the text file in csv format where a set of day start values is recorded for every day shortly after midnight.
It will be used "endlessly". To set an end respectively close that diary just rename the file. A new "dayFile" will then be created an used hence on.

See also: evtFilNam retFilNam

◆ cmdLookUp

cmdLookUp_t cmdLookUp[]

The common command look up table.

It must end with an entry {"", 0}.

The current (CGI) program uses linear search for the command mnemonic. Hence, and cause of structure, alphabetic sorting is of no avail.

◆ fLine

volatile float fLine

last valid power line frequency

Last valid power line frequency.

last valid power line frequency

The measurement is taken from the more precise home three phase meter if communicative via Modbus. Otherwise the other meter's value is taken if available. Due to slow Modbus communication the values may be older than two seconds worst case.
This low sampling rate won't comply with VDE-AR-N 4105 cut off rules requiring a 0.1s reaction outside 47.5..51.5Hz. Nevertheless the current experimental set-up is a working proof-of-concept implementation (with very low power) — and a faster frequency measurement could easily be implemented.

◆ smdX30modbus

smdX30modbus_t smdX30modbus[ANZmodSLAVES]

Descriptive and state array for smart meters on Modbus.

The number of meters is ANZmodSLAVES.

◆ tempTankWater

volatile int tempTankWater

Last value of tank water temperature in mgrdC.

This value will be the last good .tempTankTop (see valFilVal_t) or the last good .tempPipe. If neither is good for 251 measurements BAD_TEMP_READ (an incredibly high value) will be set.
This last tank water temperature will be checked against a safety limit to allow electric heating as ballast.
The value is in units of 1/1000 grdC.

◆ tempWaterBadCnt

volatile uint8_t tempWaterBadCnt

Tank water temperature bad read count.

This last tank water temperature will be checked against a safety limit to allow electric heating as ballast.

In case of too many bad reads the value must be fixed at 253

◆ invHasUnloadPow

volatile int invHasUnloadPow

The miniJoule inverter has battery unload power.

Or at least may still have due to step up converter capacitors.

Functions

Variables